论火力发电厂循环水泵房出水管抗推部分的结构设计

文章以某2×300MW机组火力发电厂循环水泵房为例，介绍了循环水泵房结构出水管抗推部分的设计方法。     

室外空调管道及供热工程设计

文章对室外空调管道及供热工程完成了设计,着重解决了管道走向、管径、可靠性、安全度、保温、供热方案的选择等问题。     

单螺杆泵的合理选择研究

为合理选择单螺杆泵,将螺杆泵抽油井作为一个大的生产系统,把油层、套管、油管、井下螺杆泵机组和井口作为5个子系统,利用系统节点分析法,确定出泵的工作载荷,并根据油井的实际工作参数,对泵特性曲线进行换算。由油井工作参数和单螺杆泵输油特性曲线对比可知,单螺杆泵的特性曲线和油井工作参数配合最好的情况是:油井的工作点应位于泵特性曲线Q0-H0的下面,而且在高效区的开始处。实践证明,采用这种方法选泵,既能保证油井的产量,又能明显地提高单螺杆泵整套装置的效率,还能延长泵的使用寿命。     

浅析化学制药中低温合成反应的实现

文章主要介绍设计制冷机组来实现头孢类抗生素的低温合成反应。首先介绍了制冷机组运用在化学制药低温合成反应中的意义,其次介绍如何选用制冷剂和载冷剂并通过整个制冷系统的传热能量衡算来确定制冷压缩机、冷凝器和蒸发器,最后介绍通过制冷系统的试运行验证此制冷机组是否符合使用要求。     

小型潜水电泵监督抽查的技术标准

文章提出了小型潜水电泵监督抽查依据的国家行业技术标准。     

新型耐腐蚀水环真空泵防腐防爆性能突出

由酚醛玻璃纤维增强塑料热压成型生产的耐腐蚀水环式真空泵是一种新型的耐腐蚀真空设备,它比普通水环式真空泵耐腐蚀效果理想,并且不易造成泵轴扭断,维修量小,节电效果显著,是一种值得广泛推广的真空设备。     

BLK4-250比例控制器在供水系统设计中的应用

介绍用流量／电流比例控制器取代交流变频调速装置作为高压供水系统的核心部件,通过可编程控制器 (PLC)对工频水泵机组的自动控制作用,消除了由变频器在运行过程中所引发的谐波、喘振、憋压、水锤效应等不利因素的影响,达到了稳定供水压力、节约电能、提高系统可靠性的目的。     

轮胎温度场有限元分析系统的设计

文章针对轮胎在行驶过程中各部位胶料受热情况不一致这一特点,深入地研究了轮胎滚动过程中的稳态热平衡状态。并通过经验数据的积累,从轮胎结构的参数化设计、断面网格划分与有限元分析、温度场计算及结果输出5个角度,设计出轮胎温度场有限元分析系统,证明了输出的温度场云图与现实中稳态轮胎温度场的温度分布情况一致。     

Long-term health economic benefits of sensor-augmented pump therapy vs continuous subcutaneous insulin infusion alone in type 1 diabetes: a UK perspective

Aims/hypothesis:

Continuous subcutaneous insulin infusion (CSII) is an important treatment option for type 1 diabetes patients unable to achieve adequate glycemic control with multiple daily injections (MDI). Combining CSII with continuous glucose monitoring (CGM) in sensor-augmented pump therapy (SAP) with a low glucose-suspend (LGS) feature may further improve glycemic control and reduce the frequency of hypoglycemia. A cost-effectiveness analysis of SAP?+?LGS vs CSII plus self-monitoring of blood glucose (SMBG) was performed to determine the health economic benefits of SAP?+?LGS in type 1 diabetes patients using CSII in the UK.

Methods:

Cost-effectiveness analysis was performed using the CORE diabetes model. Treatment effects were sourced from the literature, where SAP?+?LGS was associated with a projected HbA_1c reduction of ?1.49% vs ?0.62% for CSII, and a reduced frequency of severe hypoglycemia. The time horizon was that of patient lifetimes; future costs and clinical outcomes were discounted at 3.5% and 1.5% per annum, respectively.

Results:

Projected outcomes showed that SAP?+?LGS was associated with higher mean quality-adjusted life expectancy (17.9 vs 14.9 quality-adjusted life years [QALYs], SAP?+?LGS vs CSII), and higher life expectancy (23.8 vs 21.9 years), but higher mean lifetime direct costs (GBP 125,559 vs GBP 88,991), leading to an incremental cost-effectiveness ratio (ICER) of GBP 12,233 per QALY gained for SAP?+?LGS vs CSII. Findings of the base-case analysis remained robust in sensitivity analyses.

Conclusions/interpretation:

For UK-based type 1 diabetes patients with poor glycemic control, the use of SAP?+?LGS is likely to be cost-effective compared with CSII plus SMBG.     

多气源掺混作为城市燃气过渡气源在实际中的应用

为了解决青岛市煤气供需不平衡的矛盾,为引进天然气作好前期准备,我公司将多种气源(焦炉煤气、焦炉烟道气、空气、全水煤气、半水煤气、液化石油气、石化厂净化干气)均匀掺混,掺混后的煤气热值控制在15 675～17000 kJ/m3(适合青岛市燃具),含氧量不大于4.0%.通过实际应用,多气源掺混供气,满足了供气需要,可以作为过渡气源满足城市燃气转换成天然气的需要.